change your rusty faded broken fogs DIY! (part 2)

Postby Javier on Mon Oct 27, 2008 3:52 am

[attachment=2]DIY - change fogs - 4 - old assembly what to repair.JPG

I re-attached the tab by screwing it together with the frame. It went OK so I will show you the same thing on the new frame.

I used a tiny nail, and heated it so it would burn a hole for the screw to get in.
[attachment=1]DIY - change fogs - 6 - nail and fire.JPG


[attachment=0]DIY - change fogs - 7 - burning a hole on tab.JPG

Be patient, and repeat the procedure as needed. The hole needs to be a little thinner than the screw you are going to use.

I found out DEPO plastic is considerably weaker than Hella's (my old fogs are Hellas)... it melts way faster.

(to be continued)
BMW 316i Hellrot - '95 Sedan (German version) - Almost there! Next repairs: mouldings. My bimmer has an A/C unit, finally!!!
User avatar
Javier
Advanced
Advanced
 
Posts: 53
Joined: Sun Sep 28, 2008 8:29 pm
Location: Asunción, Paraguay
Cars: E36 316i hellrot sedan
Top

change your rusty faded broken fogs DIY! (part 3)

Postby Javier on Mon Oct 27, 2008 3:57 am

[attachment=2]DIY - change fogs - 8 - hole on tab and screw in.JPG


Now the frame:
[attachment=1]DIY - change fogs - 9 - hole on frame and screw in.JPG


When you are done with both, it is time to test:
[attachment=0]DIY - change fogs - A - frame repaired.JPG


(to be cont.)
BMW 316i Hellrot - '95 Sedan (German version) - Almost there! Next repairs: mouldings. My bimmer has an A/C unit, finally!!!
User avatar
Javier
Advanced
Advanced
 
Posts: 53
Joined: Sun Sep 28, 2008 8:29 pm
Location: Asunción, Paraguay
Cars: E36 316i hellrot sedan
Top

change your rusty faded broken fogs DIY! (final)

Postby Javier on Mon Oct 27, 2008 4:13 am

Let's put our repaired frame in place.

[attachment=2]DIY - change fogs - B - frame tab in place.JPG


Now we place the fog light. Much better than before.
[attachment=1]DIY - change fogs - E - now the left one.JPG


We do the same with the driver's side, and voilá:
[attachment=0]DIY - change fogs - G - final results.JPG

I used PIAA Extreme Whites... still no match for my 6000k LEDs :(
Maybe I should not try to match them at all, and yellow my fogs... what do you think about it? Yellow lamin-x? Hm... maybe they won't look good with my amber turnlights.
BMW 316i Hellrot - '95 Sedan (German version) - Almost there! Next repairs: mouldings. My bimmer has an A/C unit, finally!!!
User avatar
Javier
Advanced
Advanced
 
Posts: 53
Joined: Sun Sep 28, 2008 8:29 pm
Location: Asunción, Paraguay
Cars: E36 316i hellrot sedan
Top

Re: change your rusty faded broken fogs DIY!

Postby tonysticks on Mon Oct 27, 2008 7:31 am

Wow! thanks Javier for the great writeup. I really enjoyed it.

About the Yellow lamin, I think it may look nice, but I'm not sure about the gray bumper. If it was the same color as the rest of the car, it would definitely look great. Take a look at this:
[img]http://img.photobucket.com/albums/v222/joenationwide/m3_homiezcompressed2.jpg[/img]
best regards,
Tony Sticks
[url=http://www.bmwe36blog.com/]BMW E36 Blog[/url] / [url=http://www.bmwe36blog.com/forum/]BMW E36 Forum[/url]
User avatar
tonysticks
Site Admin
Site Admin
 
Posts: 160
Joined: Fri Sep 26, 2008 10:20 pm
Cars: BMW E36 318is 1993

Re: change your rusty faded broken fogs DIY!

Postby Javier on Mon Oct 27, 2008 1:30 pm

Well, since you just set up this nice forum, now I had no excuse :D

Hm... hellrot bumper/sideskirts... I did think about it. It will look great, I am sure about it.

I keep them stock just because all the other e36s I see 'round here have them color-matched with the rest of the car. So mine 'stands out' hehe... and for a sedan it is not ugly the way it is. Gives the car a 'thinner' look... I like my cars thin, like the venerable e30 (that is another car I really like).

And all this leads to bitching about the new e9Xs... Where are you going BMW, where? Stop the madness!

But getting back on topic: nice picture! makes me want to try yellow lamin-x. Let's place an order and start waiting for them to arrive :|
BMW 316i Hellrot - '95 Sedan (German version) - Almost there! Next repairs: mouldings. My bimmer has an A/C unit, finally!!!
User avatar
Javier
Advanced
Advanced
 
Posts: 53
Joined: Sun Sep 28, 2008 8:29 pm
Location: Asunción, Paraguay
Cars: E36 316i hellrot sedan

Re: change your rusty faded broken fogs DIY!

Postby tonysticks on Mon Oct 27, 2008 8:53 pm

You can always try the yellow lamin first, then you can decide whether you want to color-match your bumper or not. I guess this would be a better way and you can see it in real which helps you decide better, right?
best regards,
Tony Sticks
[url=http://www.bmwe36blog.com/]BMW E36 Blog[/url] / [url=http://www.bmwe36blog.com/forum/]BMW E36 Forum[/url]
User avatar
tonysticks
Site Admin
Site Admin
 
Posts: 160
Joined: Fri Sep 26, 2008 10:20 pm
Cars: BMW E36 318is 1993

Re: change your rusty faded broken fogs DIY!

Postby Javier on Mon Oct 27, 2008 9:52 pm

Yup, I guess I can try those yellow lamins. In that picture they look superb. As an added benefit, they will add a little protection, so it can't be bad.

I can't get those where I live (or if I can, they are very expensive). I need to think about my purchases very carefully, and having taken an option, wait a very long of time for them to get to my door...

I'll let you know like... 15 days from now, when the product arrives :)
BMW 316i Hellrot - '95 Sedan (German version) - Almost there! Next repairs: mouldings. My bimmer has an A/C unit, finally!!!
User avatar
Javier
Advanced
Advanced
 
Posts: 53
Joined: Sun Sep 28, 2008 8:29 pm
Location: Asunción, Paraguay
Cars: E36 316i hellrot sedan

Re: change your rusty faded broken fogs DIY!

Postby tonysticks on Tue Oct 28, 2008 8:14 am

Cool.. we'll be waiting :-)
best regards,
Tony Sticks
[url=http://www.bmwe36blog.com/]BMW E36 Blog[/url] / [url=http://www.bmwe36blog.com/forum/]BMW E36 Forum[/url]
User avatar
tonysticks
Site Admin
Site Admin
 
Posts: 160
Joined: Fri Sep 26, 2008 10:20 pm
Cars: BMW E36 318is 1993

Re: change your rusty faded broken fogs DIY!

Postby jarozila on Mon Jan 05, 2009 11:42 pm

That was really clever to put in a small screw to hold that bit in place.

I know when I changed my front fog lights the brackets were also brocken. I ended up taking the old ones out and putting in new ones - and wasn't that fun to do. NOT!!!
[img]http://i6.photobucket.com/albums/y235/jarozila/Jan09_01.jpg[/img]
User avatar
jarozila
Rookie
Rookie
 
Posts: 4
Joined: Mon Jan 05, 2009 10:35 pm
Cars: E36 318is

Next

Return to Exterior Styling

Who is online

Registered users: Bing [Bot], Google [Bot]

cron