best regards,
Tony Sticks
[url=http://www.bmwe36blog.com/]BMW E36 Blog[/url] / [url=http://www.bmwe36blog.com/forum/]BMW E36 Forum[/url]
User avatar
tonysticks
Site Admin
Site Admin
 
Posts: 160
Joined: Fri Sep 26, 2008 10:20 pm
Cars: BMW E36 318is 1993
Top

Re: few little problems with 318is?

Postby bmwe36318is on Tue Jan 05, 2010 8:11 am

excellent reply tony much appreciated, just one more thing lol were abouts would i find the thermostat?
User avatar
bmwe36318is
Rookie
Rookie
 
Posts: 2
Joined: Sun Jan 03, 2010 7:28 pm
Cars: bmw e36 318is

Re: few little problems with 318is?

Postby tonysticks on Tue Jan 05, 2010 8:47 am

To access the thermostat, you need to remove the cooling fan and then remove the bolts holding the thermostat housing. You should find a DIY for this on the web.
best regards,
Tony Sticks
[url=http://www.bmwe36blog.com/]BMW E36 Blog[/url] / [url=http://www.bmwe36blog.com/forum/]BMW E36 Forum[/url]
User avatar
tonysticks
Site Admin
Site Admin
 
Posts: 160
Joined: Fri Sep 26, 2008 10:20 pm
Cars: BMW E36 318is 1993

Re: few little problems with 318is?

Postby big AL on Tue Jan 19, 2010 7:10 pm

you must replace your plastic sliders in the window mechanism.they are not very expensive.you will find that the are worn and the ball from the arm slips out either from the one or both,normally the one pops out.when you replace them with new ones there is a clip on the sliders ,don't pull back slide the plastic slider in line with the ball on the arm and just knock it in with your hand.put some graphite grease on.hope this helps you
User avatar
big AL
Rookie
Rookie
 
Posts: 6
Joined: Tue Jan 19, 2010 10:22 am
Cars: 1995 325i convertable

Re: few little problems with 318is?

Postby mattloveshis318is on Tue Apr 20, 2010 5:17 pm

there is a problem with the siders now as i have the same problem but it is on the drivers side window. i went to a garage and i would have to buy a regulator. but went to a local scrappy and got a plastic slider from a later 318is. worked fine until it broke again. just watch out. also if you look at a different coupe they apparently are not the same. all else fails find a milling machine
the only 318is in somerset with a big-bore!!!!!!
User avatar
mattloveshis318is
Rookie
Rookie
 
Posts: 4
Joined: Tue Apr 20, 2010 4:56 pm
Cars: BMW 318IS M42


Return to Troubleshooting

Who is online

Registered users: Google [Bot]

cron