BMW E36 Blog

As you may know, I’m facing trouble with my BMW E36 318is idle and until now, I was unable to totally fix the problem. I’ve cleaned the ICV, changed oxygen sensor, checked for vacuum leaks but this didn’t solve my problem. I still have a problem in one of the knock sensors, but mechanics say that it doesn’t affect the idle in anyway. Well, although this may sound correct, but I’m going to change it anyway simply because I hate to have such a problem in my car which may cause some damage to the engine.

Now, I’ve discovered last week that my DISA valve doesn’t close. For those who don’t know what the DISA valve is, please check here and here.

I’ve tried to reach to the DISA valve and check to see if the actuator arm retracts if I turned my engine on and below 4,700 RPM. I found out that the DISA valve doesn’t close and I think this may affect the idle although I’m not 100% sure of that.

So, what I’m looking for is some help from you guys. Anyone with M42 engine can confirm that the DISA valve actuator arm retracts when you start your engine. To check that simply:

1. Reach with your hand behind the DISA diaphragm.

2. You should feel a small arm that you can press with your finger when the engine is off.

3. Now, according to the Bentely manual, the actuator arm should retract when the engine is started (at idle).

Now, can you feel the actuator arm retracts when the engine is started? Can you please confirm this?

BMW E36 Blog: The ultimate E36 information source.

Join the BMW E36 Forum

 

Want to receive exciting tips & information about BMW E36 cars? Enter your Email:-

 

 

This entry was posted on Thursday, July 3rd, 2008 at 5:35 pm and is filed under Engine, Tips & Tricks, Uncategorized. You can follow any responses to this entry through the RSS 2.0 feed. Both comments and pings are currently closed.